Home Forums General Technical Questions Alarm siren volume very low

This topic contains 1 reply, has 2 voices, and was last updated by  okcalarmguy1234 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #11216

    MRK
    Member

    Hi,

    I've got a Br1nks alarm system, and the volume of the siren is very, very low.  So much so, that it's practically inaudible.

    The exterior of the siren unit looks exactly like this: Ademco-747-Indoor-Siren

    This used to work before, though I recently had some work done in my house, and the contractors disconnected the siren temporarily, so I'm wondering if it was perhaps reconnected incorrectly, though I would've assumed that it wouldn't work at all if the wiring was incorrect.

    Also had a poke around in the control panel (big gray box in the closet), and am wondering if I mistakenly pulled a wire or something that caused this.

    Any ideas as to what the cause of this could be, and how I can fix it?

    Thanks.

    MRK

    Edit link

    #50791

    if your alarm was going off and annoying your contractors before they disconnected it i would make sure they didnt first stuff something in it

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.