Home Forums Ademco Technical Questions lynxr-en installation manual

This topic contains 2 replies, has 2 voices, and was last updated by  eklum 8 years, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #3642


    I just bought a used Lynxr-en and need to know some basics of setup. an installation manual would be great. If not that then . . .1. where do the wires from the power supply go inside the unit.?2 what is the pinout of the 16 screws inside the back of the unit?greatly appreciate any help


    Old EW Tech

    I sent you an Installation Manual for an older version (only one I have); take a look at it and see if it helps with the connections.

    In the meantime, we’ll try to come up with a manual for your version.



    I just wanted to tell you how greatful I am for the manual you and the other Dave sent.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.