Home Forums Caddx Technical Questions need help on a ranger 7600

This topic contains 5 replies, has 2 voices, and was last updated by  ABLE1 4 years, 11 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #8234

    dup
    Participant

    Hi there, i moved into a house with an old system- ranger 7600.I have no alarm codes, but i do have the user and installation manuals.The master code in the manual don t work. I want to know if

    #39095

    ABLE1
    Participant

    Hello and welcome to the Forum.

    I will look into your question and respond later.

    ABLE1

    #39097

    dup
    Participant

    Thanks, waiting to hear from you again.

    #39110

    ABLE1
    Participant

    Ok,

    Sorry for the delay.  Very busy day, so little time.

    Without the "Go to Program Code" it will not be possible for you to default the panel.  On page #6 of the install manual details the procedure. 

    Unless you have a 8950 Programmer or 9075 Smart Programmer you have little other choices.

    The keypad procedure would be as follows:\

        C  0  0  9  7  1  3  9  1  0  #

    That will default the panel if the Program Code is 9 7 1 3.  Otherwise is is locked. :(

    Hope this helps.

    ABLE1

    #39115

    dup
    Participant

    Thanks for the info, but the system uses the 8601 led keypad. The 9713
    code also don t work. I will try my local security people or the nearest bin.

    Thanks

    #39121

    ABLE1
    Participant

    Before you have your local guy come out ask them if they have the programmer for the 7600.  It would be very helpful.

    Good luck.

    ABLE1

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.